TAMBORINE MOUNTAIN SPORTS COMPLEX - Sports Lighting Upgrade Project'

Summary and scope

The extent of works, for which construction is required for Tamborine Mountain Sport Centre - Sports Lighting Upgrade Project Lighting upgrade to soccer and rugby league fields only Condition report on exiting 4 light towers (GM Poles) Supply and install 2 x new 25m GM poles & cross arms referenced as LP05 & LP06 Supply and installation of 16 Sylvania Raptor SR2A 4000K 1200W Luminaires (refer to document No. 0250198- 01R1.AGI) Supply and Installation of new Distribution Board, luminaire drivers to be installed within this DB. Embankment to be retained to prevent erosion from jeopardizing structural integrity of new Distribution Board and associated footings Light switches to be housed within DB 3 x 10a 1P switched outlets + 1 x 32A 5P switched outlet to be installed within new DB with suitable cable entry for event power Multifunction Energy meter to be installed within DB Removal of old DB and install new Electrical pit to intersect existing conduits & cables Light tower No. 1 (closest to existing Electrical Distribution Board) requires soil pulled away from base and retainment to prevent build up in the future Baseplate grout is starting to crack and has not been installed as per pole manufacturers recommendation, suggest regrouting all 4 poles as per GM Poles grouting procedure (document attached) Weep holes to be installed through grout Light towers to be identified as per drawings with labels affixed to lower inspection covers New Electrical pit required near LP05, currently 100mm HD conduit turned up New Electrical pit required near LP04 to replace existing pit damaged beyond repair Concrete apron to be poured around all pits to protect edges from mower damage, suggest 150mm width Existing pits to be cleaned out - suggest vacuum excavation Existing luminaires and associated pole mounted control gear to be removed Suitable weatherproof terminal strip to be utilised within base of poles for all cable terminations New light fittings to be aligned as per lighting design and lux levels confirmed & documented on completion of works As constructed drawings & operation manuals to be handed over on completion of works Testing & Commissioning