Supply and Deliver to Warren, Diesel Driven Trash Pumps and Accessories.

Summary and scope

Supply and Deliver to Warren, the following Pump & Engine Assemblies and Accessories: Total number of pumps will be determined by the supplied pump flow rate. Total flow rate required is 1300l/s with 7m suction lift and 25m delivery head. As an example; If the pump you are offering is capable of 26l/s, 1300 / 26 =50 pump units. If the pump you are offering is capable of 35 l/s, 1300 / 35 = 38 pump units. Each Assembly to contain; PUMP: Trash Pump. Self-Priming. Minimum 100mm Suction & Discharge diameter. Minimum 7m Suction Lift. Minimum 20m Discharge Head; and Minimum flow 1500 Litres/Minute. Preferred flow 1800 litres/Minute. Maximum flow 2100 Litres/Minute. Female Camlok fitting on pump suction. Male Camlok fitting on pump discharge. No plastic Camlok fittings to be utilised. Aluminium, Bronze or Stainless Steel only. Engine: 4 Stroke, air cooled diesel. Electric start, complete with fitted battery. Minimum 8 hours fuel capacity at 100% duty. DSE 3110 or approved equivalent, Engine Controller; and The Engine controller must start and stop the pump via a 2-wire float ball. Hoses and Fittings: 6m Heavy-duty, UV Resistant, reinforced suction hose fitted with a one-piece Metalic suction strainer and Male Camlok. 2 x 10m Heavy duty, UV Resistant lay flat hose fitted with a Female and Male Camlok; and Hose clamps to be heavy duty Bolted SS.